AT2k Design BBS's VADV-PHP Home

AT2k Design BBS Message Area

Casually read the BBS message area using an easy to use interface. Messages are categorized exactly like they are on the BBS. You may post new messages or reply to existing messages!

You are not logged in. Login here for full access privileges.

Previous Message | Next Message | Back to CD-ROM Discussion Net <-- <---

Return to Home Page

CD-ROM Discussion Net [58 / 250]

From

Subject

Date/Time

SLURP!!

Tarheel Cruiser

Help..!

April 24, 1996
5:45 PM

Re: Help..!

> I am trying to install a MITSUMI 2X ATAPI IDE CD-ROM on my brother's computer
> and the driver gives me this message:
>      IDE CD-ROM not detected.....Driver not loaded.
> His computer is a 386 DX/40 ISA-BUS system.  He has an ISA IDE Super I/O
> controller on his system.  I have the CD-ROM jumpers set to 'Slave' and have
> attached the CD-ROM to the secondary connector on the IDE ribbon cable.  I
> have done everything I know to do such as:  Switch connectors on the cable,
> check for device conflicts, change the jumper settings and nothing has worked
> yet.
> Anyone who could give me some insight on this problem would make me very
> happy.

make sure the jumpers on the HD are set to "master w/ slave present"
 or somthing to that effect..............

                     $∩┐╜∩┐╜∩┐╜P!!


┌┐┌┐∩┐╜∩┐╜ (419)-666-0905  ∩┐╜ ∩┐╜ ∩┐╜─┐ ∩┐╜─┐    ∩┐╜  ∩┐╜   ∩┐╜∩┐╜─┐ ∩┐╜  ∩┐╜   ∩┐╜ ∩┐╜ ∩┐╜
∩┐╜∩┐╜┘│∩┐╜∩┐╜ ∩┐╜\∩┐╜∩┐╜∩┐╜├┤∩┐╜M∩┐╜∩┐╜∩┐╜    ∩┐╜ ∩┐╜ ∩┐╜─┐ ∩┐╜∩┐╜∩┐╜    ╙╖∩┐╜∩┐╜    ∩┐╜─┤ ∩┐╜∩┐╜─┤   ∩┐╜ ∩┐╜ ∩┐╜
∩┐╜  ∩┐╜∩┐╜∩┐╜ ∩┐╜∩┐╜∩┐╜∩┐╜∩┐╜∩┐╜∩┐╜∩┐╜∩┐╜∩┐╜∩┐╜∩┐╜    ∩┐╜∩┐╜∩┐╜ ∩┐╜∩┐╜∩┐╜ ∩┐╜      ∩┐╜∩┐╜  o ∩┐╜∩┐╜∩┐╜∩┐╜    ∩┐╜   o o o

Previous Message | Next Message | Back to CD-ROM Discussion Net <-- <---

Return to Home Page

Execution Time: 0.0183 seconds

If you experience any problems with this website or need help, contact the webmaster.
VADV-PHP Copyright © 2002-2025 Steve Winn, Aspect Technologies. All Rights Reserved.
Virtual Advanced Copyright © 1995-1997 Roland De Graaf.
v2.1.250224